How to Make a Beat Online for Free, Step by Step
November 5, 2026 · Updated November 17, 2026 · 7 min read
You don't need a studio, a paid app or a MIDI controller to make a beat. A beat is a short drum pattern that repeats, usually with a bass line and a chord or two on top, and you can build one in a browser tab in about fifteen minutes. This guide walks through the whole process, from choosing a tempo to exporting a loop you can use in a song or a video.
The steps use the free Mixbeatly beat maker, but the ideas work the same way in any step sequencer or DAW. Headphones help: you will hear the kick and bass far more clearly than on laptop speakers.
What a beat is made of
Almost every beat, in every style, is built from the same handful of roles:
- Kick drum. The low thump that sets the pulse. In most styles it lands on beat 1, and often on beat 3 or in between.
- Snare or clap. The sharp crack on beats 2 and 4, called the backbeat. It is what makes people nod.
- Hi-hats. The steady ticking on top that fills the space between kick and snare and sets how busy the beat feels.
- Percussion. Shakers, rims, congas and the like add detail and movement.
- Bass. A low note, often following the kick, that gives the loop its root.
- Chords or melody. A chord stab, a pluck or a pad that sets the mood.
In a step sequencer, one bar of 4/4 is split into 16 equal steps, each a sixteenth note. Steps 1, 5, 9 and 13 are the four beats, so drummers count the bar in sixteenths: one-e-and-a, two-e-and-a, and so on. Switching a step on makes that row's sound play at that moment.
Choose a tempo and a kit
Tempo, measured in beats per minute (BPM), does as much as the sounds to tell a listener what style they are hearing. Ableton's free Learning Music course gives typical ranges such as 60 to 100 BPM for hip-hop, 115 to 130 for house and 160 to 180 for drum and bass. The six kits in the beat maker each open at a tempo typical of their style:
| Kit | Starting tempo | Feel |
|---|---|---|
| Lo-fi | 84 BPM, 18% swing | Relaxed and dusty, with electric piano chords |
| Reggaeton | 92 BPM | A steady kick under the dembow snare |
| Dhol & Tabla | 100 BPM, 10% swing | Bouncing dhol and tabla patterns |
| Afrobeats | 106 BPM, 8% swing | Syncopated kick, shaker and log drums |
| House | 124 BPM, 6% swing | Four on the floor with offbeat hats |
| Trap | 140 BPM | 808s, half-time snare and hat rolls |
If you are making a beat for a song you already know, find its tempo first with the BPM detector or by tapping along, then type that number into the Tempo box.
Build your first loop
This example uses the House kit at 124 BPM, but the same pattern works in any kit. Choose pattern slot B, which starts empty, so the kit's starter groove stays safe in slot A.
- Switch on the Kick at steps 1, 5, 9 and 13. That is a kick on every beat, the "four on the floor" pulse of house and disco.
- Switch on the Clap at steps 5 and 13, beats 2 and 4. Press Play: you already have a recognizable dance beat.
- Switch on the Open hat at steps 3, 7, 11 and 15, the "and" of each beat. Offbeat hats are what make house feel like it is lifting.
- Add the Closed hat on every step, then lower its level slider until it sits behind the kick and clap. It should be felt more than heard.
- Add Bass C at steps 3 and 11 and Bass G at steps 7 and 15. An offbeat bass line is a classic house move, and it keeps the bass out of the kick's way so the low end stays clear.
- Put a Chord stab on step 11 so the chord answers the bass once per bar. Play the loop for a minute and adjust levels until nothing pokes out.
That is a complete, usable loop. Everything after this is about making it feel better and giving it somewhere to go.
Make it groove
A pattern where every hit sits exactly on the grid can sound stiff. Four small changes make a big difference:
- Add swing. Swing delays every second sixteenth note, the "e" and the "a" of each beat. Around 10 to 20 percent gives the laid-back feel of lo-fi and boom bap. At 30 percent, the maximum, the rhythm is close to a full triplet shuffle.
- Move one kick. In hip-hop and Afrobeats, a kick just before or after the beat, such as on step 8 or step 11, creates syncopation, the push and pull that makes a groove interesting.
- Vary the hats. Switch on two or three extra hat steps in the last beat of the bar, or use a hat roll before the next bar. Trap leans heavily on this.
- Leave space. The steps you leave empty matter as much as the ones you fill. If the beat feels cluttered, remove sounds before adding new ones.
To make a quiet "ghost" hit, the soft snare notes drummers play between backbeats, use a second sound such as the Rim on its own track with its level turned down, since each track has a single level.
Turn one bar into a song section
A single bar repeated for three minutes gets tiring. The four pattern slots let you write variations without losing the original:
- Finish your main groove in slot A.
- Press Copy, choose slot B and press Paste. Change two or three things: drop the kick for a breakdown, or add percussion for a chorus.
- Paste into slot C and turn it into a fill: a snare or hat roll across the last beat leads the ear into the next section.
- Use slot D for an intro, for example just hats and chords.
The beat maker plays one slot at a time, so the arrangement itself happens in your DAW or video editor: export each slot as a WAV and line them up, for example four bars of intro, eight of the main groove, one fill, then the variation.
Shape the sound
Three controls work on the whole kit. Filter is a low-pass filter: pull it down for a muffled, next-room sound or sweep it up to build tension. Reverb places the kit in a room; a little goes a long way, because reverb blurs kick drums. Drive adds saturation that thickens 808s and kicks. A compressor at the end of the chain keeps the peaks even.
For balance, start with the kick and bass, the loudest elements in most styles, then bring in the snare, then the hats, then everything else. To take a sound out completely, use its M (mute) button rather than dragging its level slider to zero, so the level you set is still there when you bring it back.
Export and use your beat
When the loop is ready, choose 1, 2, 4 or 8 bars and press Export WAV. The file is a 16-bit stereo WAV. Each export has a short lead-in of 20 milliseconds and a tail of about two seconds after the final bar, which lets reverb ring out instead of stopping dead. To loop it seamlessly in a DAW, remove the lead-in and set the loop region to exactly the number of bars you chose.
Two more ways to keep your work: Record audio captures a live take of everything you play, including pads you finger-drum over the loop, and Save project downloads a small file that reopens every pattern, tempo and level later, on any device. If you'd like to practice playing parts by hand, the drum pad lessons teach eight grooves step by step.
Common beginner mistakes
- Too many sounds at once. Many strong beats use only four to six sounds in a bar. Mute tracks until the groove still works without them.
- Hats too loud. Hi-hats cut through a mix easily, so they sound louder than their level suggests. Turn them down until you almost miss them.
- Everything on the beat. If every hit lands on steps 1, 5, 9 and 13, the beat marches instead of grooving. Move one sound off the beat.
- No variation. Change something every four or eight bars, even if it is only a fill or a missing kick.
- Mixing on laptop speakers alone. They can't play deep bass, so you add too much of it. Check on headphones too.
Sources
Build the loop from this guide in the free beat maker.
Open Beat MakerKeep reading
5 min readRead guideFinger Drumming for Beginners: A Practical GuideLearn finger drumming from scratch: hand position, which fingers to use, your first four grooves, a 15-minute daily routine and when to buy a pad controller.November 5, 2026
6 min readRead guideHow to Find the BPM of a Song: 5 Reliable MethodsFind any song's tempo five ways: a BPM detector, tap tempo, a stopwatch count, your DAW or a lookup, plus how to fix half-time and double-time readings.November 5, 2026
5 min readRead guide

