Tempo changer
Change the tempo of a song or recording while its key stays exactly where it was. Slow a tricky solo down to learn it, or speed up a lecture to save time.
Loading the tool…
How to change the tempo of a song
- Drop a song or recording here, or press Use a demo loop.
- Set Tempo anywhere from 50% (half speed) to 200% (double speed). 100% is the original.
- Press Preview and give it a few seconds to process the whole file. Move the slider again only after the Ready message appears.
- Adjust and preview until it feels right, then press Download WAV. The file name records the setting, for example song-tempo80.wav.
Working out the right percentage
To move a song from one tempo to another, divide the tempo you want by the tempo it has and multiply by 100. The length changes the other way: at 80%, a song plays for 1.25 times as long.
| Goal | Setting | Result |
|---|---|---|
| Practice a 120 BPM song at 90 BPM | 75% | A 3:00 song becomes 4:00 |
| Bring a 90 BPM track up to 100 BPM | 111% | 99.9 BPM, about 2:42 for a 3:00 song |
| Match a 124 BPM track to 128 BPM | 103% | 127.7 BPM, within half a beat per minute |
| Hear a 3:00 song at double speed | 200% | 1:30 |
The slider moves in 1% steps, which gets you within about half a percent of any target. Don't know the tempo you are starting from? The BPM detector reads it from the file.
Practicing with a slowed track
Slowing a recording without lowering it is one of the oldest tricks for learning music by ear, and it works for any instrument and for singing.
- Start at 60 to 70% and loop the passage until you can play it cleanly three times in a row.
- Raise the tempo by 5% and repeat. Small steps keep the accuracy you built at the slower speed.
- Near full speed, practice with the original. The key never changes along the way, so you play in the same position on your instrument at every speed.
For drills without a recording, the metronome handles the same slow-to-fast routine with accents and subdivisions.
How the time stretch works
The tempo changer uses WSOLA, a time-stretching method that cuts the sound into short overlapping slices and places them further apart to slow down or closer together to speed up. Each slice is nudged until its waveform lines up with the previous one, so the joins stay smooth. Because no slice is played faster or slower, the pitch never moves. The pitch shifter uses the same method in reverse to change the key and keep the tempo.
Questions
Does changing the tempo change the pitch?
No. The song stays in its original key at every setting from 50 to 200%. If you want the turntable effect, where speed and pitch move together, that is what the slowed and reverb and nightcore tools do.
How slow can I make a song?
Down to 50%, half the original speed. That is slow enough to hear every note of a fast guitar or piano run.
Can I speed up a podcast or lecture?
Yes. Speech stays easy to follow at 125 to 150% for most listeners, and up to 200% is available. Download the result and play it in any app.
Why does it sound echoey at extreme settings?
Time stretching rebuilds the audio from short overlapping slices. Near 50% or 200%, especially on dense music, you can hear the slices as a slight echo or flutter. Settings between 75 and 150% sound most natural.
Is my file uploaded for processing?
No. The time stretch runs in your browser, so even long practice recordings stay on your device.

