BPM detector
Drop in a song and get its tempo in seconds, with a confidence check and the half-time and double-time readings. Tap along to confirm, then send the tempo to the metronome.
Loading the tool…
How to find the BPM of a song
- Drop an MP3, WAV, M4A, OGG or FLAC file here, or try the demo loop, which was made at 84 BPM.
- Wait a moment while the first 90 seconds are analyzed.
- Read the tempo. Clear beat means a confident result; Uncertain means you should tap along to check it.
- Press Play the song and use Tap along to confirm, especially for very fast or very slow music.
- Press Use in metronome to practice at that tempo.
How the detector works
The detector listens for onsets: the sudden rises in energy where a drum is hit or a note begins. It turns the first 90 seconds of the song into a curve of those onsets, then looks for the time gap at which the curve best repeats itself, checking that the pattern also repeats over two and four beats so that a strong off-beat doesn't fool it. When two readings fit almost equally well, typically a tempo and its double, it prefers the one in the most common range for popular music. The result comes with a confidence check based on how clearly the winning tempo stands out from the rest.
When to double-check by tapping
- Very fast music. Drum and bass, footwork and fast punk may be reported at half speed.
- Very slow music. Slow ballads and ambient tracks can be reported at double speed, or come back Uncertain.
- Changing tempos. Live recordings, classical music and songs that speed up or slow down get an average, which may not match any one section.
- Quiet intros. Only the first 90 seconds are analyzed. If the drums come in late, cut the intro off with the audio trimmer and analyze again.
- Strong swing or triplet feel. Shuffles can confuse the beat with the subdivision. Tap along to be sure.
To tap, press Play the song and hit Tap along on each beat; the tempo you tap appears beside the button. The dedicated tap tempo tool adds a steadiness check and averages up to 16 taps.
Typical tempos by genre
These ranges are typical rather than strict, but they help you judge whether a result is in the right family or needs halving or doubling.
| Genre | Typical BPM |
|---|---|
| Lo-fi hip-hop | 70 to 90 |
| Boom bap hip-hop | 85 to 95 |
| Reggaeton | 88 to 100 |
| Afrobeats | 100 to 115 |
| Pop | 100 to 130 |
| House | 120 to 128 |
| Techno | 125 to 145 |
| Trap | 130 to 150, often felt at half time (65 to 75) |
| Dubstep | About 140, usually felt at half time (about 70) |
| Drum and bass | 170 to 180, often counted at half time (85 to 90) |
Once you know a song's tempo, you can practice with it on the metronome, build a beat that matches it in the beat maker, or move it to a new tempo with the tempo changer. The guide on how to find the BPM of a song explains every method in detail.
Questions
How accurate is the BPM detector?
For music with a steady beat and drums, the estimate is usually within one BPM, and it is shown to a tenth of a BPM. Songs without a clear pulse, or with tempo changes, get an Uncertain label so you know to check by tapping.
Why does it show half or double the tempo I expected?
Many songs can be counted two ways. The detector favors tempos in the middle of the usual range, so a 174 BPM drum and bass track may come back as 87. The half-time and double-time values under the result give you the other reading.
Why does it say the file is too short?
The detector needs at least four seconds of music to find a repeating beat. Longer is better: it analyzes up to the first 90 seconds.
Can it find the key of a song too?
No, it detects tempo only. For the notes of a vocal recording, the singing pitch checker shows each note sung and the range used.
Can it listen through my microphone?
No. It reads audio files on your device. To measure the tempo of live music, use tap tempo and tap along.
Is the song sent anywhere for analysis?
No. The onset analysis runs in your browser, and the file never leaves your device.

