Speaker and headphone test

Make sure left is left and right is right, then find the highest tone your speakers, headphones and ears can reach. Start with the volume low.

Loading the tool…

How to test your speakers or headphones

  1. Turn your device's volume down before you start. You can raise it gradually.
  2. Press Left ear and Right ear. Each plays a one-second 1 kHz tone on one side only; Both plays it in the middle.
  3. Press Start the sweep. A tone rises from 8 kHz to 20 kHz over 30 seconds.
  4. Press I can't hear it now the moment the tone disappears. The readout shows where you stopped.
  5. Use the single tones, from 8 to 20 kHz, to check one frequency at a time.

Left and right check

The Left ear button should sound only in your left ear or left speaker, and Right ear only on the right. Both should sit in the center, between the two. Common problems and their causes:

  • Sides swapped. Headphones on backward, speaker cables connected to the wrong outputs, or a stereo swap option in an audio app.
  • Both buttons sound on both sides. A Mono Audio accessibility setting is on, or the device has a single speaker or sums its speakers to mono.
  • One side quieter. A balance slider in your system's sound settings, a damaged cable, or a blocked earbud.
  • Nothing on one side. A loose plug, a faulty driver or a Bluetooth earbud that has dropped its connection.

The test tone is 1 kHz, which every speaker and headphone can play clearly. Getting left and right correct matters most for stereo effects such as 8D audio, which only work when each ear hears its own channel.

The high-frequency sweep

The sweep rises smoothly from 8 to 20 kHz over 30 seconds, and the number on screen follows it. Where you press I can't hear it now depends on three things at once:

  1. Your hearing. The highest audible frequency falls gradually with age, a normal change called presbycusis, and loud noise exposure can speed it up.
  2. Your equipment. Many small speakers can't play the top of the range at all, and some Bluetooth connections and sound enhancement settings filter it out.
  3. The volume. Hearing sensitivity drops steeply at the top of the range, so a tone that is inaudible at a low volume can reappear when turned up.

Because of this, the result is best used for comparisons: two pairs of headphones on the same day, or your hearing on the same headphones a year apart. The single tones let you go back and confirm a frequency, for example to check whether you really hear 16 kHz or only thought so during the sweep.

Safe listening

Keep the Volume slider and your device volume low to start, and raise them only as far as you need to hear the tones. High frequencies can be uncomfortable well before they sound loud. If a tone hurts, stop. Hearing damage builds up with exposure to loud sound over time; the World Health Organization's guidance is to keep personal listening levels down and take regular breaks.

Questions

Is this a hearing test?

No. It is a sound check for your equipment and a rough look at the top of your hearing. It can't diagnose anything. If you notice muffled hearing, ringing or trouble following speech, see an audiologist for a proper test.

Why can't I hear 20 kHz?

Very few adults can. The upper limit of hearing falls gradually with age, and many speakers and headphones can't play the highest tones anyway. Stopping somewhere between 12 and 17 kHz is common.

Why does the left tone come out of both sides?

Usually a Mono Audio setting is on. Phones, Windows and macOS all have one in their accessibility settings. Some single speakers and laptops also mix both channels together.

Can I test my bass or subwoofer here?

No. This page checks left and right balance and the high end. For the low end, play a bass-heavy track you know well and listen for rattles or missing notes.

Is it safe?

At a sensible volume, yes. High tones can be piercing, so start low, raise the level slowly and stop if anything feels uncomfortable. Pets hear these frequencies too, so keep the volume down if they are nearby.