Tap tempo
Tap along with the beat of any song, live or recorded, and read its tempo. The count averages your last 16 taps and tells you when your tapping is steady.
Loading the tool…
How to find the BPM by tapping
- Play the song from any app, speaker or instrument.
- Tap the big button, or press Space, T or Enter, on every beat: where you would clap or nod your head.
- Keep going for at least eight taps. The readout averages your most recent 16 taps and shows Steady once your timing is even.
- If the number is half or double what you expected, check the Half time and Double time values below it.
- Press Use in metronome to practice at that tempo, or Reset to start again. A pause of two seconds also starts a new count.
Half time or double time?
Two people can tap the same song and get answers that differ by a factor of two, and both can be right. A trap beat at 140 BPM is often felt at 70, with the snare on beat 3; drum and bass at 174 BPM is often tapped at 87. Neither number is wrong: one counts every beat, the other every second beat.
The readout shows the tempo you tapped, plus the half-time and double-time equivalents, so you can pick the one that matches how the song is usually described. As a rule, most pop, rock and hip-hop is quoted between 70 and 180 BPM, and DJs quote dance music by the kick drum.
Beat length for delay and reverb
"One beat lasts" shows the length of a quarter note in milliseconds, which is what you need to set delay effects and reverb pre-delay in time with a song.
| Note value | Formula | At 90 BPM | At 120 BPM |
|---|---|---|---|
| Quarter note | 60,000 ÷ BPM | 667 ms | 500 ms |
| Dotted eighth | Quarter × 0.75 | 500 ms | 375 ms |
| Eighth note | Quarter ÷ 2 | 333 ms | 250 ms |
| Sixteenth note | Quarter ÷ 4 | 167 ms | 125 ms |
Tap tempo or BPM detector?
- Tap tempo works with anything you can hear: a song on a streaming app, a band in the room, a record, or a tempo in your head. It also measures the beat you feel, which is often what you want.
- The BPM detector reads the tempo from an audio file without any tapping. It is faster for a stack of tracks, but it needs the file on your device.
For the most reliable answer, use both: detect the tempo from the file, then tap along to confirm it isn't half or double. Once you have the number, the metronome and the beat maker can play at it.
Questions
How many taps do I need?
Two taps give a first number, but it settles after eight or more. The readout uses up to your last 16 gaps between taps, and the Steady badge appears when those gaps vary by less than about 4%.
How accurate is tap tempo?
With steady tapping over 16 beats, the result is usually within about one BPM. Each tap is a little early or late, but averaging many taps cancels most of that out.
Does tap tempo use my microphone?
No. It only times your taps. Nothing listens to the room, and nothing is recorded or uploaded.
Why did my count start over?
A pause of more than two seconds between taps starts a new count, so you can move on to the next song without pressing Reset. Taps less than a tenth of a second apart count as one, which filters out accidental double taps.
Can I use it on my phone?
Yes. The tap button is large enough for a thumb and registers the moment you touch it, not when you lift your finger, so the timing follows your tap.

