Online granular synthesizer

Load a sound, press Play and move the sliders. This granular synth plays a stream of tiny overlapping slices of your file, so a single word, chord or drum hit becomes a pad, a drone or a cloud of sound.

Loading the tool…

How to use the granular synth

  1. Press Use a demo loop, or drop in a sound of your own. Sustained notes, voices, chords and short loops work best.
  2. Press Play. The highlighted area on the waveform shows the part of the sound the grains are taken from.
  3. Move Position to pick the moment you want to hear, and raise Spread to take grains from a wider stretch around it.
  4. Set Grain size and Density together: long grains at a high density blur into a smooth pad, short grains at a low density sound like rain or glitches.
  5. Use Pitch to transpose by up to an octave either way, and Random pitch to scatter the grains into a shimmering cloud.
  6. Keep the sliders moving while it plays. The synth responds live, and slow movements are how most granular textures are performed.

What each control does

ControlRangeWhat it changes
Position0 to 100%The point in the file the grains are read from. Moving it slowly scans through the sound at your own speed without changing its pitch.
Spread0 to 100%How far each grain can wander from Position, as a share of the file's length. Low values freeze one moment; high values mix the whole file into a cloud.
Grain size20 to 400 msThe length of each slice. Short grains sound buzzy and granular; long grains keep more of the original's character.
Density4 to 80 a secondHow many grains start each second. Start times are slightly randomized, which avoids a mechanical buzz.
Pitch-12 to +12 semitonesTransposes every grain, up to an octave in either direction.
Random pitch0 to ±12 semitonesGives each grain its own random detune, from a slight chorus to a wide, bell-like scatter.
Volume0 to 100%The output level, adjustable while it plays.

Overlap is the key number

Whether you hear a smooth tone or separate blips depends on how many grains overlap at any moment, which is the grain size in seconds multiplied by the density. At the default settings, 120 ms grains at 24 a second, about three grains overlap, and the sound is continuous. Below one, there are gaps between grains and the result turns rhythmic and stuttery. Above four or five, the grains melt into a dense, even wash.

Five textures to try

  • Freeze a moment. Spread 0 to 5%, Grain size 200 to 300 ms, Density 30 to 40. Park Position on a vowel or a chord and it sustains for as long as you like.
  • Ambient cloud. Spread 40 to 70%, Grain size 60 to 100 ms, Density 50 to 70, Random pitch 2 to 3. A busy recording becomes a soft, moving bed.
  • Octave shimmer. Pitch +12, Random pitch 1, Density 40 or more: the bright, glassy layer behind many ambient pads. For an even softer result, run the source through the add reverb tool first and load the reverb version here.
  • Low drone. Pitch -12, Grain size 300 to 400 ms, Spread 10%. Works especially well on voices and synth chords.
  • Glitch rain. Grain size 20 to 40 ms, Density 4 to 10, Spread 100%. Sparse clicks and fragments that suit a beat's background layer.

Where granular synthesis comes from

The idea that any sound can be built from tiny acoustic particles goes back to the physicist Dennis Gabor in the 1940s. The composer Iannis Xenakis put it to musical use with cut-up tape in the late 1950s, and Curtis Roads made it a computer technique in the 1970s. Today it sits inside most modern synthesizers and sound design tools, and this page gives you the core of it with nothing to install. For melodic results from your own voice, try voice to instrument, which follows the notes you sing instead of scattering them.

Questions

What is granular synthesis?

A way of making sound from very short slices of a recording, called grains, usually 20 to 400 milliseconds long. Each grain gets a smooth fade in and out, and many of them are played at once and overlapped, so the result can be a sustained texture that sounds nothing like the original recording.

Can I export or record what I make?

Not on this page. The granular synth plays live only. To capture it, record your computer's audio with a recorder that can capture system sound, such as OBS Studio or Audacity on Windows with the WASAPI loopback input.

What sounds work best?

Anything with a steady, sustained part: a held vocal note, a pad, a chord, a bowed or blown instrument, or a field recording such as rain. Very short drum hits give fewer usable grains, but turning Spread down and Grain size up still pulls a tone out of them.

Why does it get so loud at high density?

Every grain adds to the ones already playing. At 80 grains a second with 400 millisecond grains, around 32 grains sound at once, so turn Volume down before pushing Density and Grain size to their limits.

Does the synth need an internet connection?

Only to load the page. After that, your browser decodes the file and plays every grain on your device, and nothing is sent to a server.